[Linux-stm32] [PATCH 8/9] serial: fsl_lpuart: set SER_RS485_DELAY_IN_USEC accordingly

[Martin Kepplinger]

Clear SER_RS485_DELAY_IN_USEC for userspace to get correct settings.

Signed-off-by: Martin Kepplinger <martin.kepplinger at ginzinger.com>
---
 drivers/tty/serial/fsl_lpuart.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index ea1c85e3b432..a63aa22e3a25 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1124,6 +1124,7 @@ static int lpuart_config_rs485(struct uart_port *port,
 	rs485->delay_rts_before_send = 0;
 	rs485->delay_rts_after_send = 0;
 	rs485->flags &= ~SER_RS485_RX_DURING_TX;
+	rs485->flags &= ~SER_RS485_DELAY_IN_USEC;
 
 	if (rs485->flags & SER_RS485_ENABLED) {
 		/* Enable auto RS-485 RTS mode */
-- 
2.20.1

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3616 bytes
Desc: not available
URL: <http://st-md-mailman.stormreply.com/pipermail/linux-stm32/attachments/20190220/e3becbc9/attachment.bin>