[Linux-stm32] [PATCH 2/9] Documentation: serial-rs485: document SER_RS485_DELAY_IN_USEC flag

[Martin Kepplinger]

Document the new RS485 flag, SER_RS485_DELAY_IN_USEC that specifies that the
rts delay values stored in struct serial_rs485 hold values in microseconds
instead of milliseconds (the default).

Signed-off-by: Martin Kepplinger <martin.kepplinger at ginzinger.com>
---
 Documentation/serial/serial-rs485.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt
index ce0c1a9b8aab..a1e15e9efc2e 100644
--- a/Documentation/serial/serial-rs485.txt
+++ b/Documentation/serial/serial-rs485.txt
@@ -75,6 +75,9 @@
 	/* Set rts delay after send, if needed: */
 	rs485conf.delay_rts_after_send = ...;
 
+	/* Specify the rts delay to be microseconds, not milliseconds */
+	rs485conf.flags |= SER_RS485_DELAY_IN_USEC;
+
 	/* Set this flag if you want to receive data even while sending data */
 	rs485conf.flags |= SER_RS485_RX_DURING_TX;
 
-- 
2.20.1

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3616 bytes
Desc: not available
URL: <http://st-md-mailman.stormreply.com/pipermail/linux-stm32/attachments/20190220/caa12e69/attachment.bin>