[Linux-stm32] [PATCH v2 0/2] Add STM32MP157 discovery boards support

[Alexandre Torgue]

On 2/5/19 10:07 AM, Alexandre Torgue wrote:
> This patch series add support of two new discovery boards based on
> STM32MP157 MPU: stm32mp157a-dk1 and stm32mp157c-dk2.
> 
> stm32mp157a-dk1 board embeds a STM32MP157a SOC with AC package (TFBGA361,
> 148 ios) and 512MB of DDR3. Several connections are available on this boards:
> 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...
> 
> stm32mp157c-dk2 board complements stm32mp157a-dk1 board with a display panel
> (otm8009a) and a Murata Wifi/BT combo. It embeds a STM32MP157c SOC with AC
> package.
> 
> Those patches enable basic support for a kernel boot.
> 
> regards
> Alex
> 
> Alexandre Torgue (2):
>    ARM: dts: stm32: add initial support of stm32mp157a-dk1 board
>    ARM: dts: stm32: add initial support of stm32mp157c-dk2 board
> 
>   arch/arm/boot/dts/Makefile            |  2 +
>   arch/arm/boot/dts/stm32mp157a-dk1.dts | 77 +++++++++++++++++++++++++++++++++++
>   arch/arm/boot/dts/stm32mp157c-dk2.dts | 75 ++++++++++++++++++++++++++++++++++
>   3 files changed, 154 insertions(+)
>   create mode 100644 arch/arm/boot/dts/stm32mp157a-dk1.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp157c-dk2.dts
> 

Series applied on stm32-next.

Regards
Alex