[Linux-stm32] [PATCH 2/8] net: ethernet: stmmac: update to support all PHY config for stm32mp157c.

[Christophe ROULLIER]

On 2/14/19 4:15 PM, Andrew Lunn wrote:
>> Sorry, I've misunderstood your question ;-)
>>
>> And you spoke about :
>>
>> case PHY_INTERFACE_MODE_RGMII:
>> case PHY_INTERFACE_MODE_RGMII_ID:
>> case PHY_INTERFACE_MODE_RGMII_RXID:
>> case PHY_INTERFACE_MODE_RGMII_TXID:
>>
>> So in my setup I've only RGMII interface, so I've never tested 3 others
>> interfaces (_ID, _RXID, _TXID).
>>
>> So do I need to add cases in my driver ?
> 
> Yes. They all indicate the MAC should be using RGMII.
> 
> This appears to be an old issue, but now would be a good time to fix
> it.
> 
>       Andrew
> 
Ok Andrew, I will update with these

Thanks

Christophe