[Linux-stm32] [PATCH 2/8] net: ethernet: stmmac: update to support all PHY config for stm32mp157c.

[Andrew Lunn]

 On Thu, Feb 14, 2019 at 07:45:57AM +0100, Christophe Roullier wrote:
> @@ -131,19 +185,19 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
>  	case PHY_INTERFACE_MODE_RGMII:
>  		val = SYSCFG_PMCR_ETH_SEL_RGMII;
> -		if (dwmac->int_phyclk)
> +		if (dwmac->eth_clk_sel_reg)
>  			val |= SYSCFG_PMCR_ETH_CLK_SEL;
>  		pr_debug("SYSCFG init : PHY_INTERFACE_MODE_RGMII\n");
>  		break;

Hi Christophe

This code should handle all 4 PHY_INTERFACE_MODE_RGMII* values.

     Andrew