[Linux-stm32] [PATCH] ARM: dts: stm32: add DFSDM pins to stm32mp157c

[Alexandre Torgue]

Hi Olivier

On 8/1/19 9:46 AM, Olivier Moysan wrote:
> Add DFSDM pins to stm32mp157c.
> 
> Signed-off-by: Olivier Moysan <olivier.moysan at st.com>
> ---
>   arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 39 +++++++++++++++++++++++++++++++
>   1 file changed, 39 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> index 9eaec9bf8cb8..f96a928cbc49 100644
> --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
> @@ -230,6 +230,45 @@
>   				};
>   			};
>   

I use to only take pinconfig which are used in board. So please resend 
with the "board patch".

regards
Alex


> +			dfsdm_clkout_pins_a: dfsdm-clkout-pins-0 {
> +				pins {
> +					pinmux = <STM32_PINMUX('B', 13, AF3)>; /* DFSDM_CKOUT */
> +					bias-disable;
> +					drive-push-pull;
> +					slew-rate = <0>;
> +				};
> +			};
> +
> +			dfsdm_clkout_sleep_pins_a: dfsdm-clkout-sleep-pins-0 {
> +				pins {
> +					pinmux = <STM32_PINMUX('B', 13, ANALOG)>; /* DFSDM_CKOUT */
> +				};
> +			};
> +
> +			dfsdm_data1_pins_a: dfsdm-data1-pins-0 {
> +				pins {
> +					pinmux = <STM32_PINMUX('C', 3, AF3)>; /* DFSDM_DATA1 */
> +				};
> +			};
> +
> +			dfsdm_data1_sleep_pins_a: dfsdm-data1-sleep-pins-0 {
> +				pins {
> +					pinmux = <STM32_PINMUX('C', 3, ANALOG)>; /* DFSDM_DATA1 */
> +				};
> +			};
> +
> +			dfsdm_data3_pins_a: dfsdm-data3-pins-0 {
> +				pins {
> +					pinmux = <STM32_PINMUX('F', 13, AF6)>; /* DFSDM_DATA3 */
> +				};
> +			};
> +
> +			dfsdm_data3_sleep_pins_a: dfsdm-data3-sleep-pins-0 {
> +				pins {
> +					pinmux = <STM32_PINMUX('F', 13, ANALOG)>; /* DFSDM_DATA3 */
> +				};
> +			};
> +
>   			ethernet0_rgmii_pins_a: rgmii-0 {
>   				pins1 {
>   					pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
>