[Linux-stm32] [PATCH v2 0/2] Add support for STM32MP1 power regulators

[Pascal PAILLET-LME]

The POWER block of the STM32MP1 integrates 3 fixed regulators with a ready
status bit for each one. The goal of this patchset is to add support those
regulators.

Pascal Paillet (2):
changes in v2:
* add COMPILE_TEST switch
* do not test ready in is_enabled() callback
* remove of_regulator_match
* change author

  dt-bindings: regulator: Add stm32mp1 pwr regulators
  regulator: Add support for stm32 power regulators

 .../bindings/regulator/st,stm32mp1-pwr-reg.txt     |  43 +++++
 drivers/regulator/Kconfig                          |   7 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/stm32-pwr.c                      | 190 +++++++++++++++++++++
 4 files changed, 241 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt
 create mode 100644 drivers/regulator/stm32-pwr.c

-- 
1.9.1